Emails and Notes from Resonon

Note: The shake test showed very little movement of the tracks and wavelengths. Mark asked if Resonon was doing something different. Casey answered "The only difference that I am aware of with this unit is the specification to Leoni regarding the angular tolerance between the line connecting the center of the fibers to the attachment through holes.  This fiber met that specification, which meant that we did not have to over drill or slot the through holes.  I didn't measure the OD of the fiber ferule, but it was very difficult to get it to clear the inside o-ring.  Between the two, I can believe that the fiber alignment was less susceptible to shaking.  It doesn't, however, explain the spectral stability."

Email from Mike on 12/8/2017 3:51 PM

Hi Casey, We received the BS05 in HI in fein condition today, Friday 08-Dec-2017, Thank you very much!
One question:
the SN on this unit is tagged = 100114-6,
but the report says it should = 100114-5.
Should we re-name this unit = 100114-5?
Cheers, MF

Caseys reply

Hi Michael,

Sorry for the confusion, the 6 is correct.  We put together 5 but there was a small tilt in the optics, which we will hunt down. So 6 was sent first and I mixed up the numbers in the report.

CS 

I (Stephanie) have updated the pre-delviery document and renamed all the dirs, html files and m-files