Config14
16-Apr-2018 to 16-Apr-2018

This is a fiber bend test.The chamber was off. Most of the movement was to the output fiber.

This is S/N 2, without the PDBS or mirror, and with the collet fibers on the input and output as in Config 12.

Output Fiber: Collet Fiber on one end, FC on the other; used to replace the output fiber on Config11. Collet marked "DO NOT TWIST"; fiber labeled with orange electrical tape. This is the same fiber as Config12.
Input Fiber: Collet Fiber on one end, FC on the other; used to replace the input fiber on Config12. Collet marked "DO NOT TWIST"; fiber labeled with green electrical tape.

The SEI acquired data during the day, at a higher cadence than usual. The door on the chamber was cracked open aobut 3" and held there.